ZIMMER SCATTER COATING LINE

One Pre-Owned ZIMMER Scatter Coating Line with the following equipment: (NO DRYER)

 

 

Infeed:

1 – A-FRAME STATION FOR LET OFF

1 – MENZEL 7-ROLL HYDRAULIC COMPENSATOR,

1 – SET OF SMALL 4” X 86” RUBBER-COVERED PRESS ROLLS.

1 – PAIR OF E&L GUIDERS,

1 – SET OF 4 RUBBER ROLLS,

1 - PRE-OWNED ZIMMER ROTARY SCREEN PRINTING LINE, TYPE EKA 169

Technical Data:

Printing width max: 2200 mm. (86”)

Number of color: 1

Repeat range: 64-102 cm. (25-40”)

Repeats installed: 640 mm. (25")

Machine speed: maximum 100 meters/minute

Operating Data:

Service voltage: 3 phase, 480V, 60 Hz.

Thickness Scanning Unit:

1 – AIS-X-RAY, MODEL 1-1-10, VOLTAGE IS 10 KV, CURRENT .2 UA, THIS IS A GAUGE FOR TESTING THICKNESS. 

Scatter Applicator Unit:

1 – 72” APPLICATOR TO APPLY POWDER SUBSTANCE TO BE DROPPED ONTO THE CONVEYOR.

1 – SUCTION SYSTEM FULL WIDTH OF 90” WITH 3 SECTIONS THAT WILL TAKE ANY

UNUSED POWDER INTO A VACUUM COLLECTION SYSTEM AND INTO A 55 GL. DRUM.

Thickness Scanning Unit: 

1 – MEASUREX MODEL CONCEPT 1 BETA GAUGE X-RAY SENSOR FOR APPLICATION

THICKNESS CONTROL OVER THE ENTIRE APPLICATION WIDTH. 

– PAIR OF COOLING ROLLS, CHROME PLATED, 87” X APPROX. 14”, BOTH WITH COOLING

1 – SMALL MENZEL 8-ROLL COMPENSATOR, LIGHT WEIGHT, AT THE EXIT END, WITH A

MENZEL DRIVEN A-FRAME WINDER, 79” FACE.